> >>1 kolom hydraulische hefbrug 2,5 Ton - 400V - 2,60m
1 kolom hydraulische hefbrug 2,5 Ton - 400V - 2,60m Bekijk groter

1 kolom hydraulische hefbrug 2,5 Ton - 400V - 2,60m

RP-EA-700E-400V

Nieuw product

RP-700E - 400V

De nieuwe elektrohydraulische 1-punts liften van RP TOOLS zetten nieuwe maatstaven op het gebied van heftechnologie. De enkellaagse lift zorgt voor een energiezuinige werking op plaatsen met een lage plafondhoogte, zoals in garages. Via de geïntegreerde palletkrik kan de lift eenvoudig worden gemanoeuvreerd en indien nodig binnen hallen of parkeerplaatsen worden gebruikt.

Meer details

3 223,13 € excl. btw

3 899,99 € incl. btw

Meer informatie

RP-700E

The new electro-hydraulic 1-post lifts from RP TOOLS set new benchmarks in the field of lifting technology.

The single-post lift with 2.5 tons load capacity ensures an energy-efficient operation in places with a low ceiling height, like in garages. Through the integrated pallet jack, the lift can be easily manoeuvered around and operated inside halls or parking lots, if needed.

With its robust column design, the lift is also perfectly suited for smaller workshops Particularly car body shops and paint shops rely on this type of lift, as it can be operated with limited available space.

The construction is based on an electro-hydraulic power system with automatic safety locks, which ensures an energy-efficient operation, a low noise level and cost-effective work. The powerful hydraulic units come in 230V or 400V versions and are attached to the lower section of the columns for optimal handling.

We have a large selection of models with different configurations to meet all workshop requirements.

Features
  • Internal lifting carriages with long-lasting load bearings.
  • Entire operation like "Raise" and "Lower" via control box.
  • Maximum flexibility through four symmetrical and asymmetrical telescoping support arms, developed for cars up to the newest generation of transporters.
  • Maximum standard lifting height of 1870 mm, with height-adjustable contact pads.
  • Quickly adjustable lift pad height through the use of new plug-in screw pads.
  • Low minimum height of only 100 mm
  • Automatic arm restraints with additional manual release.
  • High rigidity due to specifically designed posts and base plates with small footprint,
  • Emergency lowering unit for lowering in case of power failure.
  • Lifting pad height extensions for different vehicle models (optional).
  • Tube rupture and chain fracture protection.
  • Motor overload protection.
  • CE STOP.

Technical Specifications

Arm locking system
Arm locking system
Automatic
Automatic release function
Automatic release function
Yes
Color
Color
Blue
Construction
Construction
Hydraulic
Control
Control
Elektronic
Delivery contents
Lifts
1 x RP-EA-700E-260 lift
4 x 2-Stage telescoping screw lift pads
1 x Manual with inspection log book
1 x Control unit
1 x Hydraulic power unit
Dimensions
Drive-over height (mm)
Over 100
Frame height (mm)
100
Required ceiling height min. (mm)
2650
Stroke range (mm)
1870
Support arm extension front (mm)
650 - 860
Support arm extension rear (mm)
380 - 660
Total width (mm)
1420
Drive
Drive
Electric Motor
Electro-hydraulic
Electrics
Control voltage (VDC)
24
Electricity supply:
Electrical connection
3P+PE
Frequency (Hz)
50
Fuse (electric) (A)
16
Voltage (V)
400
Motor capacity (kW)
1 x 2,2
Ground
Ground
Mounted
Lifting time approx.
Lifting time approx. (s)
45
Load capacity
Load capacity (t)
2,5
Lock release
Lock release
On button press electronic
Lowering time ca.
Lowering time ca. (s)
45
Noise
Sound pressure level (dBA)
75
Oil requirement
Oil requirement (liter)
10
Pressure
Hydraulic maximum pressure (MPa/bar)
18.0/180
Working pressure (bar/psi)
140 - 150 / 2030.53 - 2175.57
Type/version/design
Type/version/design
Single Post Lift
Weight (kg)
Product weight

940

Shipping weight

986

Product dimensions (mm)
Height

2600

Width

1420